- 1 Joowin WiFi Extender setup
- 1.1 Joowin Wi-Fi extender Dual-band AC1200
- 1.2 How to SetUp a JOOWIN WiFi Extender?
- 1.3 FAQ
Joowin WiFi Extender setup
Joowin Wi-Fi extender Dual-band AC1200
How to SetUp a JOOWIN WiFi Extender?
- Step 1: Plug in, turn on the ON button on the side, the light will come on. Wait about 60 seconds, connect the Wi-Fi “JOOWIN_XXX_2G” or “JOOWIN_XXX_5G”
- Step 2: joowin Login IP “192.168.10.1”, enter the password “admin” (username is also admin), click “SET PASSWORD”.
- Step 3: Scan and select WiFi
- Step 4: Enter WiFi password (previous shared key), click “Save Settings”. (We suggest you choose “Merge WiFi”, the extended signal will be better.)
- Step 5. Setting is complete, reconnect the new “XXX-2G” or “XXX-5G” WiFi in the WiFi list. (If you choose “Merge WiFi”, the new WiFi will be “XXX-2G & 5G”)
Dual-band 1200Mbps connection
Compatible with any standard Wi-Fi router.
WiFi Bridge – connect a wired device to your Wi-Fi
Three smart signal indicators
Stable connection and durability
See how to reset JOOWIN Wi-Fi Extender:
Locate the WPS/Reset button on the back of your extender (usually located on the bottom of the device).
Press and hold the reset button for about 10 seconds.
The LEDs will turn off and then turn back on, indicating that the reset was successfully completed.
Note: Please note that after a factory reset you will need to reset your device.
Yes, most models of JOOWIN Wi-Fi extenders are compatible with most existing routers, so you will not need to modify your router.
You may need to try resetting your expander first. If that doesn’t work, try updating your firmware. To do this, follow the steps below:
Go to www.joo-win.com.
Go to . Select the “Download” option from the drop-down menu.
Enter the search term “JW-WR754AC” and download the firmware. Enter the IP address “192.168.10.1” to download the firmware.
Then select “System Tools” and then “Update Firmware”.
Now download the file you just downloaded by clicking the “Upload” button.
Ideally, your extender should be halfway between your router and an area with a weak signal. Make sure the location you choose is within range of your existing Wi-Fi router before proceeding.
Yes, you can use 2 WiFi extenders at the same time. However, make sure that they are compatible with each other and are properly configured. Otherwise, you may experience reduced speeds or intermittent connectivity.
If your router’s wifi gets disconnected frequently, it could be due to a number of factors. One possibility is that your router is not configured properly. Another possibility is that there is interference from other electronic devices in your home. If you are using a wireless router, try moving it to a different location to see if that helps. If you are using an Ethernet connection, make sure the cables are plugged in securely.
Yes, WiFi extenders work through walls. They are designed to extend the reach of your WiFi signal so that it can penetrate walls and other obstacles. This means that you can still enjoy a strong and stable WiFi connection even if you’re in a different room or on a different floor of your home.
The Joowin Range Extender device supports wireless mode, which means that it can be used to extend the range of a wireless network. This is especially useful in homes or offices where there are large areas that need to be covered by a wireless signal. The Joowin Range Extender is easy to install and can be used with any wireless router.
If you find that your JOOWIN Wi-Fi is always disconnecting, there are a couple of things you can do to try and fix the issue. First, check to make sure that the Wi-Fi connection is set to “automatic” in the JOOWIN settings. If it is not, change it to automatic and see if that fixes the issue. If not, try restarting your JOOWIN router. But if you still have trouble, you may need to contact JOOWIN customer support for further assistance.
If you’re not sure how to set up your new JOOWIN Wi-Fi Extender, don’t worry – it’s easy! Just follow the instructions in the included quick start guide, and you’ll be up and running in no time. If you have any questions or need any help, our friendly customer support team is always happy to assist.
There could be a few reasons why you can’t connect to your Wi-Fi. Maybe your password is incorrect, or your router isn’t working properly. If you’re still having trouble, you can try restarting your modem or contacting your Internet service provider for help.
Joowin WiFi Repeater is not compatible with every access point. However, it is compatible with most routers and provides good coverage for small to medium sized homes.
A WiFi booster and a WiFi extender are both devices that can be used to improve the signal strength of a wireless network. However, there are some key differences between the two devices.
A WiFi booster is designed to amplify the signal from a wireless router and then broadcast it to a specific area. This can be useful if there is one area in a home or office where the signal is weak.
A WiFi extender, on the other hand, takes the signal from a wireless router and then re-broadcasts it. This can be helpful if there are multiple areas in a home or office where the signal is weak.