TV with DVB-T2 tuner
Enter the TV menu.
Open the item “Auto tune”.
Specify the signal source: antenna, cable, satellite.
Define type of channels – choose digital broadcasting.
Press the “Search” button and select “Full” option and “Scan”.
Wait for the setup to complete.
If you want to use an HDMI cable to connect a set-top box (receiver) to your Samsung TV, read the article below.
All Samsung TV models have this connector.
Turn off the devices and connect the HDMI cable to them.
Turn both devices on.
On the TV, select the HDMI source. …
Tuning and sorting channels on Samsung TV (new)
To tune the TV set, press the MENU button on the remote control, select the TRANSLATION tab by pressing the central button on the remote control or by pressing the right arrow button.
Select the item AUTONASTROKE, press the right arrow or the central button on the crossbar (ready).
Open the Menu by pressing the special key on the remote control.
Find the “Channel – Antenna” option.
Find the “Auto Tune” item.
Set the signal source to Cable and the digital channel type.
Wait until Auto Search is complete.
Tuning for air channels
Check the quality of the cable and TV connection. Try pulling out the antenna plug and putting it back in.
Visually inspect the wire around the apartment or house.
Check with your neighbors to see if their TV is showing.
Buy a signal booster if your home is far from a repeater.
There can be many reasons for the TV not finding channels. These include confused settings, and the wrong antenna connection, and malfunction of the amplifier. With some causes can be managed independently, but to solve the other you will need the help of professionals.
To set the channels, you’ll need a signal cable and a remote. Press “Settings” on the remote control to enter the settings menu. Go to “Channels”, press “OK”, then “Autosearch” and then “OK” again. In the “Auto search” menu, when selecting an input source, check the box “Antenna” and “Cable TV”.
Plug a cable into the TV’s LAN connector. If you are connecting via a router, plug the cable from your ISP into the router’s WAN connector and then another cable into the LAN connector on the TV and the router. or press Menu/123 and select Menu on the TV screen. Select Network.
To a modern TV (via HDMI)
Connect the set-top box to the power supply and antenna (if necessary).
Locate the HDMI connector on the back and plug one plug of the cable into it.
Plug the other into the same port on the back of the TV.
Turn on the set-top box with the remote, then turn on the TV.
One of the most common reasons for no signal from a set-top box is the user’s incorrect connection scheme to the TV. Once you find no signal, though, you should check to see if the video channel on your TV is correct.
Go to Home> Settings> Sound> Sound Output. Select Receiver (HDMI) from the list.
Simple instructions for setting up a Samsung TV
Select the menu (enter using the green button on the remote control).
Find the satellite dish icon (select the desired channels).
Specify the “Auto-tuning”.
From the list of options, stop at the channel source “Cable”.
Select the search for digital channels.
Enter the TV menu: Depending on the remote control, press either the Menu button or the Home button and select Settings on the TV screen. Select Broadcast. Select Autotune.
There are 5 basic ways to tune in today. Digital channels can be tuned using an antenna, tuner, fiber optic cable, satellite dish and Smart TV function.
To be able to watch digital TV without an antenna, you will need to install an application for smart tv on the TV itself or purchase a special set-top box. The second option is suitable for any model of TV receiver. You can buy a set-top box from your provider or an electrical goods store.